04-00024 Ball joint Snapper, hydraulic 4,5 T

Description

Unique design and function for removing the conic bolts on passenger cars and light commercial vehicles with ease. The tool is developed for the new front suspensions with longer conic bolts often fitted in aluminum knuckles. These fittings sit harder and are also more fragile than the older steel versions. The press tool has two different heights to choose from, 60 or 72 mm. Stroke 25 mm. The anvil tool has two different opening sizes, 26 or 32 mm.

Both tools can switch position for superior access in tight areas of the wheel suspension. The hydraulic cylinder presses 4,5 Tons and ensures a safe and problem free removal. To increase safety even further the tool is delivered with a safety strap. This will prevent the tool from falling down during operation. The tool is used with a 700 bar hydraulic pump 1030 or 1036.

Removal and fitting of wheel studs. Avoid hammering when replacing wheel studs, which would damage the inside of the bearing. The studs can easily be replaced with this new ball-joint puller.

Patent Pending European Application No. EP17179578.4 US Patent Application 16/021.868

Contains these parts:
04-00024-021 – Press tool
04-00024-022 – Anvil tool
04-00024-020 – Distance ring
04-00024-011 – Safety strap
RES4305 – Cejn nippel 1/8”